21,000 T PTW PROFI LINE
(0010) Wienhoff slurry tanker 21000 T PTW PrL
(0020) Slurry tanker type 20.800 _TW Profi Line. besch. FV
(0021)
(0022) Please send inquiries exclusively to
(0023) to the following contact details !!!
(0024) Jan Lohoff Tel. 0176-55350375
(0025) The employees of
(0026) AGRAVIS Technik Center
(0027) are hired automatically and
(0028) cannot give you any information
(0029)
(0030) Slurry tanker with interior coating and exterior painting.
(0040) 7.10m cylinder,
(0050) 6mm wall thickness, 1,90m tank Ø, 3 "welded
(0060) baffle plates"
(0070) in the tank and manhole cover parallel to the rear cover.
(0080) Tank with liquid displacement for
(0090) Support load optimization.
(0100) Tank in old fendt green, 32" wheels outer surface in red,
(0110) Axles, drawbar and small parts in black.
(0120) Safety valve
(0130) Simple tank ventilation (through the tank)
(0140) (Important: with hose routed downwards)
(0150) Second tank ventilation at the rear for FV (only for
(0160) Can-Bus)
(0170) (Important: with hose routed downwards)
(0180) Level indicator Float diameter 220 mm at the front
(0190) in the tank for Can-Bus
(0200) 8" suction nozzle with 8" mechanical slider and quick coupler
(0210) (front left for suction)
(0220) 6" suction nozzle with 6" mechanical slider and quick coupler
(0230) (front right for suction and rear
(0240) on the left directly in the tank for suction)
(0250) 8" hydraulic slide valve
(0260) (between the suction slides and
(0270) the stone trap, this slide valve
(0280) is coupled with automatic switchover)
(0290) 14 to. Gigant air suspension, forced cable steering, tandem
(0300) with 140 FAD axles, track. 2225mm, RDR front
(0310) Low center of gravity: axles above the springs (per axle
(0320) 1x wheel housing)
(0330) Wheels: 30.5 LR 32 BKT Roadmax front loader 690
(0340) Wheels: 650/65 R 30.5 Vredestein Flotation Trac
(0350) as maize tires, with connection for RDA
(0360) (fit these wheels before delivery)
(0370) Hydro-pneum. suspended bottom hitch 1900, K80 with
(0380) Hydraulic support foot
(0390) Top edge ball tractor: 700mm
(0400) Preparation for top cylinder system
(0410) Flat bar on the drawbar
(0420) 2-circuit air brake with ALB
(0430) 40 km/h equipment with galvanized mudguards:
(0440) Galvanized mudguards with round steel edge,
(0450) Warning signs + marker lights
(0460) Underride guard with truck lighting
(0470) 40 km/h TÜV certificate
(0480) Surcharge for LED lighting on underride guard
(0490) Clearance lights on the underride guard for better
(0500) Perception of the vehicle dimensions
(0510) LED
(0520) Active marker lights instead of cat's eyes on the vehicle flank
(0530) of the vehicle flank
(0540) LED
(0550) LED work lights 2 pieces, position:
(0560) left and right on the tank
(0570) 2x as reversing lights on underride guard
(0580) Preparation for camera/ rotating beacon
(0590) Bracket at the rear of the tank
(0600) Steel tube for cable routing
(0610) Vogelsang RotoCut M 10.000 cutting device
(0620) mounted on large stone catcher box.
(0630) Vogelsang rotary lobe pump VX 186/390Q - 9000 L/min
(0640) Injection system with reduction gearbox
(0650) incl. hydraulic gearbox changeover
(0660) Bondioli Pavesi PTO shaft size 9 with 10mm
(0670) Shear bolt and wide angle for large pumps
(0680) Pressure relief valve for pump tanker
(0690) For absorbing pressure peaks during changeover processes
(0700) from over 2 to 2.5 bar
(0710) Pressure side monitoring unit
(0720) Pressure gauge on the pressure side with diaphragm gauge
(0730) Monitoring unit suction side
(0740) Vacuum pressure gauge on the suction side with diaphragm gauge
(0750) Input plate (basic circuit)
(0760) Tire pressure regulation system 1 single-acting NG 10 + FR
(0770) Weight shift 1 single-acting NG 06
(0780) Roto-Cut M 10000 1 single-acting NG 10 + Stromst.
(0790) Exa-Cut distributor 1 double-acting NG 10 + L/R
(0800) Folding boom 1 double-acting NG 10 + DR+ ST
(0810) Four-point up/down 1 double-acting NG 06
(0820) Section left 1 single-acting NG 06 + TS
(0830) Section right 1 single-acting NG 06 + TS
(0840) Section 27m left/right 5/2 way E-pneum.
(0850) Section 24m left/right 5/2 ways E-pneum.
(0860) Part width 21m left/right 5/2 ways E-pneum.
(0870) Part width 18m left/right 5/2 ways E-pneum.
(0880) Part width 15m left/right 5/2 ways E-pneum.
(0890) Tramlines 5/2 ways E-pneum.
(0900) Suction/flushing 1 double-acting NG 06 + DR + HER
(0910) Filling/extraction 1 double-acting NG 06 + DR + HER
(0920) Forced steering 1 3-way flow control valve
(0930) WieTaCon 14-1 / PTW basic function
(0940) Additional control box suction / rinsing / Rotacut L&R
(0950) Suction / rinsing
(0960) Rotocut: Left / Right
(0970) Pulse spreading start/stop
(0980) (for external computer)
(0990) Aux variant 8 / Suction / Spreading / Headland /
(1000) Boom / boom section
(1010) External operation for:
(1020) Suction start - stop
(1030) Spreading Start -Stop
(1040) Boom unlocking
(1050) Boom auto-folding
(1060) Part width left - right
(1070) Headland management
(1080) Pressure line above the tank with 8" 3-way valve
(1090) (flow rate detection)
(1100) incl. lubrication point routing downwards.
(1110) (via pump speed and wheel sensors)
(1120) 6" PVC suction hose 6 m.
(1130) Hose transport tray under the tank, above the axles
(1140) RDA automatic drum 2-axle
(1150) with screw compressor, hydraulics, rotary joint,
(1160) Hoses,
(1170) Electric valve control without control unit
(1180) Additional hose to the tractor
(1190) Use of the compressor (drum side) for
(1200) Tractor-side air feed into
(1210) External tire regulator
(1220) RDA control unit WieTaCon 14/1 or 26/6
(1230) Software integration
(1240) Preparation for docking arm (single hinged)
(1250) mechanical & (electrical/only with e-hydraulics)
(1260) Direction of travel:
(1270) Wienhoff Stabilhub 700 (rigid)
(1280) Preparation for automatic Piadin dosing system
(1290) Holder for hopper and control unit,
(1300) Filler neck in suction line "blind"
(1310) & electrical preparation (only for e-hydraulics)
(1320) Central lubrication point of the axles for tandem vehicles
(1330) approx. 20 lubrication points combined to
(1340) Two lubrication points on the vehicle frame
(1350) Set of central lubrication points for drawbar and
(1360) Forced cable steering
(1370) 7 lubrication points combined to one lubrication point
(1380) on the vehicle frame
(1390) Vogelsang 30 m SSV
(1400) Vogelsang drag hose type:
(1410) SwingMax3 30m with 2x Exa-Cut 48
(1420) - Working width 30 m
(1430) - 2x48 outlets DN 40
(1440) - 31.25cm hose spacing
(1450) - hydraulically pivoting side arms
(1460) - Four-point mounting frame Cat3
(1470) - TopSwing180°
(1480) - DropStop
(1490) - TeleShift with front hydraulic cylinder
(1500) - TeleShift with hydraulic cylinder at the rear
(1510) - Hose ends in DN 50
(1520) - Switch-off from 30m to 27m, 24m,
(1530) 21m, 18m and 15m as well as 2x2 hoses in
(1540) of the tramline with CFC
(1550) Hydraulic part-width section control
(1560) Single-acting piston slide
(1570) Vogelsang impact head distributor
(1580) with bracket on boom
(1590) Pump over front left: 8" manually operated Three-way valve in the pressure line
(1600) with gooseneck and quick coupler.
(1610) 2" nozzle additionally at the front of the pump
(1620) for "frost protection" with 2" ball valve.
(1630) St. ball valve f. Ventilation ball valve on quick coupler (front left and right)
(1640) 2" sight glass on intake manifold left/right
(1650) (between slider and quick coupler)
(1660) Sump emptying via 6" slide + hand lever mechanism
(1670) Aluminum ladder with bracket on left mudguard
(1680) 6" extension hose 5m complete
(1690) (incl. V-part + M-part)
(1700) (right-hand shelf on mudguard)
(1710) Mud flap on rear mudguard (500mm from the ground)
(1720) Bracket for controls and perforated bar
(1730) and drawbar for 2nd tractor enclosed loose
(1740) Subsequent order:
(1750) Wienhoff "L&S" safety plus for tandem
(1760) Vogelsang BASE Runner to the towing hose
(1770) Preparation for the front trunk in the middle,
(1780) instead of the preparation for the docking arm
(1790) mechanical slide on the sump drainage is omitted,
(1800) a 6" flange with 2" drain cock is used for this purpose
(1810) 8" service nozzle at 07.00 o'clock at the front
(1820) VA storage box rear right
(1830) (mounted on the vehicle frame)
(1840) Additional control box lifting gear up/down
(1850) Lifting gear up/down
(1860) Hose transport tray under the tank, above the axles
(1870) WieTaCon = power supply via 3-pole
(1880) Suction hose 5m instead of 6m
(1890) Magnetic base for supplied camera
Automatic translation from German without guarantee.
Show original description
Whatsapp
Messenger
